? all specifications are subject to change without notice. conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications. issue date: october 2011 mid-high voltage ceramic capacitors cs series disk type with lead safety standard approved
(1/3) 005-03 / 20111003 / e4b3_cs.fm all specifications are subject to change without notice. mid-high voltage ceramic capacitors(disk with lead) safety standard approved cs series basic insulation type/operating temperature ra nge: ?25 to +105c(ul standard: ?25 to +85c) class 2 high dielectric features flame-resistant reinforced outer insulation prevents fires, electri- cal shock, and other potential hazards. compliant with the safety standards of 11 countries. it has a withstand voltage of ac.2600v this product is compatible with halogen-free external resin coating (we recommend halogen-free products as standard). capacitance temperature characteristics and tolerance product identification (1) type (2) shape (3) capacitance temperature characteristics (4) rated voltage (5) nominal capacitance (6) capacitance tolerance (7) class (8) lead type (9) safety standard (10) halogen-free compatible product capacitance and dimensions ? ? : lead shape symbol list of standard lead shapes the lead type is indicated by the letter which is the 15th character of the product name. dimensions in mm we recommend using a vertical kink type. for bulk products, we recommend a short lead type with the symbol n. conformity to rohs directive temperature characteristics test temperature range capacitance tolerance b(10%) ?25 to +85c k(10%) e(+20, ?55%) ?25 to +85c m(20%) f(+30, ?80%) ?25 to +85c m(20%) cs 11 -e 2ga 222 m y n s a (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) part no. capacitance temperature characteristics capacitance (pf) capacitance tolerance dimensions(mm) taping dimensions halogen-free product current product d max. t max. f d cs70-b2ga101ky ? ? sa cs70-b2ga101ky ? ? s b(10%) 100 k(10%) 7.0 7.0 7.51.5 0.60.05 v2 cs70-b2ga151ky ? sa cs70-b2ga151ky ? s 150 k(10%) 7.0 7.0 7.51.5 0.60.05 v2 cs70-b2ga221ky ? sa cs70-b2ga221ky ? s 220 k(10%) 7.0 7.0 7.51.5 0.60.05 v2 cs85-b2ga331ky ? sa cs85-b2ga331ky ? s 330 k(10%) 8.5 7.0 7.51.5 0.60.05 v2 cs85-b2ga471ky ? sa cs85-b2ga471ky ? s 470 k(10%) 8.5 7.0 7.51.5 0.60.05 v2 cs95-b2ga681ky ? sa cs95-b2ga681ky ? s 680 k(10%) 9.5 7.0 7.51.5 0.60.05 v2 cs10-b2ga102ky ? sa cs10-b2ga102ky ? s 1,000 k(10%) 10.0 7.0 7.51.5 0.60.05 v2 cs80-e2ga102my ? sa cs80-e2ga102my ? s e(+20, ?55%) 1,000 m(20%) 8.0 7.0 7.51.5 0.60.05 v2 cs90-e2ga152my ? sa cs90-e2ga152my ? s 1,500 m(20%) 9.0 7.0 7.51.5 0.60.05 v2 cs11-e2ga222my ? sa cs11-e2ga222my ? s 2,200 m(20%) 10.5 7.0 7.51.5 0.60.05 v2 cs13-e2ga332my ? sa cs13-e2ga332my ? s 3,300 m(20%) 12.5 7.0 7.51.5 0.60.05 v2 cs14-e2ga392my ? sa cs14-e2ga392my ? s 3,900 m(20%) 13.5 7.0 7.51.5 0.60.05 v2 cs15-e2ga472my ? sa cs15-e2ga472my ? s 4,700 m(20%) 14.5 7.0 7.51.5 0.60.05 v3 cs12-f2ga472my ? sa cs12-f2ga472my ? s f(+30, ?80%) 4,700 m(20%) 12.0 7.0 7.51.5 0.60.05 v2 cs17-f2ga103my ? sa cs17-f2ga103my ? s 10,000 m(20%) 16.5 7.0 102 0.60.05 ? long lead short lead taping vertical kink symbol g symbol n symbol v example) tdk product name: cs11-e2ga222mynsa n: lead type (vertical kink, short) 25min. 4max. d t f d 5 1 4max. d t f d 16 +1.5 ?0.5 4max. d t conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(2/3) 005-03 / 20111003 / e4b3_cs.fm all specifications are subject to change without notice. halogen-free product markings ? year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, o (october), n (november), or d (december). ? the expression has become simplified due to a revision in the standards. internationally certified status / iec60384-14 en60384-14 approved certificate numbers shall be changed owing to the revisions of the related standards. current product markings ? year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, o (october), n (november), or d (december). internationally certified status / iec60384-14 en60384-14 approved certificate numbers shall be changed owing to the revisions of the related standards. item marking examples 1. series 2. nominal capacitance 3. capacitance tolerance 4. rated voltage eac 5. sub-class of safety performance 6. tdk?s logogram 7. date code cs 222(2200pf) m(20%) x1y2 15 (2011.5) ? safety standard standard no. of iec standard no. temperature characteristics insulation sub-class rated voltage eac(v) approval report no. japan taiwan xiamen bsi iec 60065 bs en 60065 b, e, f x1, y2 250 km37103 km37103 km37103 iec 60384-14 bs en60384-14 vde iec 60384-14 en 60384-14 b, e, f x1, y2 250 40029781 40029781 40029781 sev iec 60384-14 en 60384-14 b, e, f x1, y2 250 10.0120 10.0120 10.0120 semko iec 60384-14 en 60384-14 b, e, f x1, y2 250 912461 912461 912461 nemko iec 60384-14 en 60384-14 b, e, f x1, y2 250 p09211677 p09211677 p09211677 demko iec 60384-14 en 60384-14 b, e, f x1, y2 250 315269-01 315269-01 315269-01 fimko iec 60384-14 en 60384-14 b, e, f x1, y2 250 fi 25553 fi 25553 fi 25553 imq iec 60384-14 en 60384-14 b, e, f x1, y2 250 v3692 v3692 v3692 saa iec 60065 as3250 b, e, f ? 400 cs6268 cs6268 cs6268 ul ? ul 1414 b, e, f (x, y) 250 e37861 e37861 e37861 csa iec 60384-14 can/csa-e60384-14 b, e, f (x, y) 250 2278972 (lr 35801) 2278972 (lr 35801) 2278972 (lr 35801) cqc iec 60384-14 gb-t 14472-1998 b, e, f x1, y2 250 cqc10001051610 cqc10001051637 cqc03001004815 item marking examples 1. series 2. nominal capacitance 3. capacitance tolerance 4. rated voltage eac 5. withstand voltage eac 6. sub-class of safety performance 7. tdk?s logogram 8. date code 9. regulatory body safety standards compliance markings cs 222(2200pf) m(20%) x1y2 15 (2011.5) ? safety standard standard no. of iec standard no. temperature characteristics insulation sub-class rated voltage eac(v) approval report no. japan taiwan xiamen bsi iec 60065 bs en 60065 b, e, f x1, y2 250 226494 226494 226494 iec 60384-14 bs en60384-14 vde iec 60384-14 en60384-14 b, e, f x1, y2 250 138559 138560 122006 sev iec 60384-14 en60384-14 b, e, f x1, y2 250 09.0962 09.0962 09.0962 semko iec 60384-14 en60384-14 b, e, f x1, y2 250 915556 915556 915394 nemko iec 60384-14 en60384-14 b, e, f x1, y2 250 p09211507 p09211507 p08209309 demko iec 60384-14 en60384-14 b, e, f x1, y2 250 315179-01 315179-01 314664-02 fimko iec 60384-14 en60384-14 b, e, f x1, y2 250 fi 25453 fi 25453 fi 24306a1 imq iec 60384-14 en60384-14 b, e, f x1, y2 250 v3692 v3692 v3692 saa iec 60065 as3250 b, e, f ? 400 6268 6268 6268 ul ? ul 1414 b, e, f (x, y) 250 e37861 e37861 e37861 csa ? csa c22.2 no.0 & no.1 b, e, f (x, y) 250 lr35801 lr65972 lr65972 250v ( ac.250v ) ( marking position is reference. ) cs222m 250 x1y2 15 bsi ( u.k. ) semko ( sweden ) vde ( germany ) sev ( switzerland ) ul ( u.s.a. ) csa ( canada ) fimko ( finland ) demko ( denmark ) nemko ( norway ) imq ( italy ) bsi tj508 250v ( ac.250v ) ( marking position of the monogram is reference. ) cs222m 250v x1y2 bsi tj508 15 front back
(3/3) 005-03 / 20111003 / e4b3_cs.fm all specifications are subject to change without notice. taping dimemsions vertical kink lead type item symbol dimensions (mm) remarks v1 v2 v3 body diameter d depends on the s pecification of each product. body thickness t depends on the specification of each product. lead-wire diameter ?d 0.60.05 0.60.05 0.60.05 pitch of component p 12.71.0 15.01.0 30.01.0 including the slant of body feed hole pitch p 0 12.70.3 15.00.3 15.00.3 excepting the tape splicing part feed hole center to lead p 1 3.850.7 3.750.7 3.750.7 feed hole center to component center p 2 6.351.3 7.51.3 7.51.3 lead-to lead distance f 5+0.8, ?0.2 7.50.8 7.50.8 measuring point is bottom kink component alignment ? h 02.0 02.0 02.0 including the slanting body due to bending lead-wire tape width w 18.0+1.0, ?0.5 18.0+1.0, ?0.5 18.0+1.0, ?0.5 adhesive tape width w 0 11.5min. 11.5min. 11.5min. hole position w 1 9.00.5 9.00.5 9.00.5 adhesive tape position w 2 3.0max. 3.0max. 3.0max. adhesive tape do not stick out the tape bottom of kink from tape center h 0 16.0+1.5, ?0.5 16.0+1.5, ?0.5 16.0+1.5, ?0.5 height of body from tape center h 1 46.0max. 46.0max. 46.0max. lead-wire protrusion 1.0max. 1.0max. 1.0max. feed hole diameter d 0 4.00.2 4.00.2 4.00.2 total tape thickness t 0.60.3 0.60.3 0.60.3 do not including adhesive tape length of snipped lead l 11.0max. 11.0max. 11.0max. coating on lead c 4.0max. 4.0max. 4.0max. height of kink a 4.0max. 4.0max. 4.0max. measuring point is bottom kink spring action s 2.0max. 2.0max. 2.0max. p p 2 d p 0 d 0 ?d a h 0 w h 1 w 1 t ? h ? h s h 0 c l t w 0 w 2 f p 1 v1, v2 p p 2 d p 0 ?d a h 0 w h 1 w 1 t ? h ? h s h 0 c l t w 0 w 2 f p 1 d 0 v3 for more information about products with other capacitance or other data, please contact us.
|
